watch - Leo Hamel

What is a Co-Axial Movement?

2024-03-152024-05-24 by Rylee Kahan

Co-axial escapement, a modern type of watch movement, was invented around 1974 by an English Master watchmaker named George Daniels. Omega acquired the rights from Daniels to use this unique new technology and in 1999, mass-produced the first watch with co-axial escapement, the Caliber 2500.

It’s easy to see the benefit of co-axial escapement when you compare it to the traditional level escapement. Getting technical, the impulse in a lever escapement involves the wheel tooth sliding along the inclined surface of the pallet. This sliding movement generates considerable friction, meaning it needs to be lubricated to function properly. However, lubricants are highly sensitive to aging and changes in their environment (temperature, humidity, etc.), and ultimately compromise the accuracy of the watch’s timekeeping.

In contrast, co-axial escapement transmits energy using radial movements. These very short sliding movements reduce the amount of contact between parts inside the watch, which therefore reduces the friction in the escapement. This is like two gears meshing with each other so that they barely touch. Their movement is unaffected by lubrication because of the lack of contact and friction – in fact, a mere protective film on the tips of the escapement wheel teeth is sufficient to prevent wear and tear. This process ensures stable timekeeping.

Since watches with co-axial escapements require less lubrication than their level escapement counterparts, they benefit from greater mechanical efficiency to produce more precise timekeeping. An even bigger advantage is that they also have longer service intervals. Level escapement watches are recommended to be serviced every 3-5 years, while co-axial escapement watches can go 7-10 years without servicing.

Visit our San Diego showroom to try on some of Omega’s finest co-axial watches!

What Are Watch Jewels?

2024-01-192024-05-24 by Rylee Kahan

Many famous watch brands will point out that their watch movements are made with a number of “jewels,” anywhere from 17 to 27 (or even more). That sounds impressive, but have you ever wondered why they are there in the first place? Any why you can’t usually see them like you can gemstones that decorate the exterior of the watch?

The short answer is that they are a functional part of the watch movement, rather than a decoration. To delve into a bit more detail, read the following article. To find the best place for watch repair in San Diego, look no further than Leo Hamel Fine Jewelers.

Where Are All These Jewels?

As mentioned before, these jewels aren’t a decoration, so they can’t be seen on the dial of the watch. They are embedded into the mechanism itself. Some high-end watches have a transparent dial or case back so that the mechanism can be observed. In these kinds of watches, the movement’s jewels can be seen. In most cases, the bearings are made of gemstones, but it is quite common that other parts of the watch mechanism are crafted from gems as well.

Why Are They There?

In any mechanism, metal parts interact with each other to create friction. Depending on the material, over time this friction causes wear and eventually, breakage. In order to prevent this from happening, or at least to prolong the durability of the parts, watchmakers needed to design the meeting points of these parts out of something harder than the metal they are made of. Since certain gemstones are very hard, they were selected for the task. Their relative hardness also means that they are more resistant to heat and other external factors, adding to the accuracy of the watches themselves.

Which Gems Are Used?

The Mohs scale of mineral hardness indicates the relative hardness of various minerals/gemstones. Only gemstones with the hardness of 9+ on the scale are acceptable for use in watch mechanisms since they are harder and more durable than the metal parts. The gemstones that fit that bill are diamond and corundum (ruby and sapphire). Initially, in the early 18^th century, natural gemstones were used. Nowadays, though, synthetic gemstones are commonly used, chiefly synthetic sapphire or rubies, and they are mass-produced specifically for the watch industry.

Why Does the Number of Jewels Vary?

Different types of watches require a different number of jewels. Typically, the simplest jeweled watch requires 17 jewels. As more complicated functions and parts are added, more jewels are needed, up to 27. In the early days, it was relatively complicated to shape the gemstones and fit them into the small and intricate watch mechanisms, so as few jewels as necessary were used to prolong the life of the movement.

And as the watches got more complicated, they required more gemstones to cushion the additional moving parts. This gave rise to the commonly held belief that more jewels meant a better watch. In response, some watch companies started adding jewels where no jewels were needed, just to increase the jewel count, and watch movements set with as many as 100 jewels were created.

Apart from high-end watches, many other sensitive measuring devices require jeweled bearings, as their resistance to heat, corrosion, and low friction is invaluable for the accuracy of measurement. Such devices include galvanometers, compasses, and gyroscopes.

San Diego Watch Repair

In our modern society, a jeweled watch can be a status symbol rather than a necessary tool. The right watch can speak louder than words about the style and status of the wearer. And even though jeweled watches are much more durable, they aren’t impervious to breakdowns. Fine automatic watches should be serviced every 3 to 5 years to avoid unnecessary wear and loss of accuracy.

If you are looking for watch repair in the San Diego area, look no further than Leo Hamel Fine Jewelers. The Master Watchmaker of Leo Hamel’s repair shop has over 35 years of experience repairing fine watches. You can be sure that your bejeweled timepiece is in safe hands.

What’s the Difference Between Quartz & Mechanical Movements?

2023-12-152024-05-24 by Rylee Kahan

The watch movement or the caliber is a mechanism that makes every watch tick. It is an engine that powers a watch and all of its functions. The mechanism moves the hands and powers any additional features such as annual calendars, chronographs or dual time zone displays. Powering all the timekeeping tasks, the movement is the most important component in any watch. There are many different movements that power a watch, but they all fall into two categories: mechanical and quartz movements.

How Can You Tell Which Movement is Which?

A simple way to tell a mechanical movement from a quartz movement is the way the second hand moves. The second hand on a quartz watch moves in ticks, while with mechanical movements, the hand moves smoothly.

Quartz movements are extremely accurate and need little regular maintenance apart from replacing batteries. While some lower-end quartz watches may run for decades without maintenance, a fine Swiss quartz watch should be serviced every 7 to 10 years. The batteries should be changed every 2 years to prevent damage.

Quartz watches tend to cost less as they have fewer moving parts and are cheaper to manufacture. Watch aficionados aren’t as attracted to them as they lack the craftsmanship and fine engineering of their mechanical counterparts. However, when made by high-end Swiss watch manufacturers, quartz movements are a perfectly acceptable solution.

Mechanical movements are preferred by many watch enthusiasts because they incorporate a high level of craftsmanship and quality. They are skillfully made by watchmakers and contain several tiny compartments that work together to power the mechanism. Mechanical movements use energy from a wound spring. This spring stores the energy and uses it to power a series of springs and gears. While the design of mechanical watches has remained unchanged for centuries, the latest technology allows for more precise engineering and finer details.

The most popular mechanical watches are those that contain perpetual-wind movements. They’re more popular because as long as you wear them regularly, you don’t have to wind them every day to make sure they are accurate. Perpetual-wind watches gather energy through the motions of your wrist. A metal weight spins with each move of your wrist, harnessing that energy to continually wind the mainspring. A special mechanism prevents it from over winding, keeping optimum tension for impeccable timekeeping performance.

Pros & Cons

Quartz watches are extremely accurate, but what also makes them popular among buyers is their low price and durability. These watches can also be equipped with additional technological features such as GPS tracking or illumination. They are also slightly more accurate than mechanical watches, which may be accurate to within a few seconds a day.

On the other hand, mechanical watches boast a much more impressive mechanism that watch-lovers love to observe. Many mechanical watches will have a clear crystal window on the back of the case to allow the owner to see the mechanism at work. Mechanical watches can last for generations as they have a significantly longer life span than their quartz counterparts have, and thus can become cherished family heirlooms.

Mechanical watches require regular maintenance and need to be cleaned by a professional every 3 to 5 years to avoid excessive wear on the parts of the movement. However, this investment will ensure that your mechanical watch lasts for many more years to come.

Watch Servicing

In conclusion, if you are looking for a cheap, accurate watch with little to no need for maintenance, you should go with quartz watches. But if you want an impressive mechanism that represents a form of art, and you are looking for a watch that will last you a lifetime, a perpetual-wind mechanical watch is an unrivaled choice.

If you own a mechanical watch, make sure to have it serviced every 3 to 5 years so that it continues to perform as well as the day it was acquired. If you need your watch professionally cleaned or serviced, call us at 619-299-1500 to find out what our in-house watch department can do for you. Our watchmaker is certified and was Rolex factory trained.

A complete watch service at Leo Hamel Fine Jewelers consists of disassembling the watch movement, cleaning out old lubricant, re-lubricating all friction points, re-assembling the movement, and adjusting the timing to factory specifications. Included is a one-year warranty on timekeeping and a 90-day warranty on parts.

The exterior of the watch is then fully refinished; removing all scratches and restoring the factory finish to the case and bracelet, making your watch look new again. You’ll be surprised at what a difference that makes!

How Long is a Rolex Made to Last?

2023-10-312024-05-24 by Rylee Kahan

To say that Rolex watches are not exactly cheap is an understatement. If you do decide to invest in a luxury timepiece, you probably want to know how long it will last.

While they’re definitely made to last, they still need some attention to stay in perfect shape over the years. If you already own one and need to have it serviced or want to know where to repair Rolex watches in San Diego, we have your answer!

With assistance from the knowledgeable in-house watchmakers at Leo Hamel Fine Jewelers, your Rolex watch is certain to last a lifetime. Visit us today!

How Long Will a Rolex Last?

When you think of Rolex, you think of superior quality and impressive durability. While such a reputation is surely a good thing for a brand, it sets the bar high and inevitably begs the question: do Rolex watches live up to their name?

One thing is certain, Rolex has been consistent in producing top-quality timepieces that keep their luster over long time periods. What’s more, the brand continues to perfect and improve their watches year after year, making sure they still look as pristine in half a century as they do immediately after production.

If you own or want to invest in a Rolex, you probably want to know how long it should last. Thanks to the master craftsmanship and exquisite attention to detail that Rolex is known for, it’s safe to say that your timepiece is likely to stay in good shape for generations with proper care and maintenance.

This is evident in the fact that vintage Rolex watches are a watch collector’s favorite. Vintage models like the Rolex Oyster Perpetual Submariner that are still in perfect working condition are quite common. Their appearance may show signs of aging, but with proper service from experienced watchmakers, they’ll look as good as new.

Does Rolex Have A Lifetime Warranty?

While we’ve established that Rolex watches are highly durable, they don’t come with a lifetime warranty. Instead, all watches are covered by an international warranty for a period of 5 years after purchase. The warranty excludes:

Wear-and-tear (straps and non-metal bracelets)
Cases of theft and loss
Damage caused by misuse
Adding or substituting components with non-original parts
Repair or service done by a third-party

Some people may be disappointed with the duration of the Rolex warranty. However, it demonstrates just how confident the brand is in the quality of its products. In many cases, a Rolex timepiece can last a lifetime, especially if it’s serviced regularly. Rolex recommends service every 10 years, but every 5 to 7 years is good for ensuring optimal performance.

Where to Repair Rolex Watches in San Diego?

Rolex watches are undeniably high-quality and durable, but should still be regularly checked. Regular service and maintenance are a must if you want to make sure your watch is always in perfect condition. In the unlikely but not impossible scenario of your Rolex breaking down, you should have seasoned professionals who can fix the issue efficiently and expertly at your beck and call.

Fortunately, you won’t have to search for the finest experts in your area for too long. Simply visit Leo Hamel Fine Jewelers on your way to Downtown San Diego. Our factory-trained technicians can repair your watch with unmatched skill and expertise. What’s more, they can tell you everything you may want to know about Rolex timepieces, whether you want to know how to spot a counterfeit Rolex or need advice for cleaning your watch. Stop by our store today!

History of the Omega Speedmaster

2023-10-032024-05-24 by Rylee Kahan

Anyone interested in history, space flight, or watch making will want to hear the story of the Omega Speedmaster. A little-known specialty watch in the 1950’s rose to fame as the watch of the astronauts. The Speedmaster sparked a top-secret development program with NASA. It is a symbol of the space race era that has endured and remains in use today. The watch has outlasted even the iconic Apollo rockets and space shuttles. This is a brief history of how it all began.

The Moon Watch

During the space program in the 1960’s, NASA sought a chronograph watch that could withstand space flight. It would have to be very accurate even when exposed to different extreme environments that don’t exist on Earth’s surface. NASA didn’t have its own development program for watches so it turned to the commercial sector to find a suitable piece.

The Omega Speedmaster seemed destined for fame. The first Speedmaster went into space on the arm of astronaut Wally Schirra in 1962. It was his personal model, and he wore it without any endorsement from NASA, as it was still several years before NASA had its own spaceflight certified watch. Between 1963 and 1964, NASA wanted to certify a watch for the Apollo missions and was open to many options. NASA directly reached out to several watch manufacturers to submit chronograph watches candidates for testing. Rolex, Hamilton, Lngines-Wittenauer and Omega submitted multiple models.

NASA Tests Omega, Rolex, & Hamilton Watches

Between October 1964 and March 1965 NASA subjected the candidate watches to these incredible tests:

High Temperature: 48 hours at 160°F followed by 30 minutes at 200°F
Low Temperature: 4 hours at 0°F
Temperature-Pressure: 15 cycles of heating to 160°F for 45 minutes, followed by cooling to 0°F for 45 minutes at 10-6 atmosphere
Relative Humidity: 240 hours at temperatures varying between 68°F and 160°F in a relative humidity of at least 95%
Oxygen Atmosphere: 48 hours in an atmosphere of 100% oxygen at a pressure of 0.35 atmosphere
Shock: Six shocks of 40 G, each 11 milliseconds in duration, in six different directions.
Acceleration: From 1 G to 7.25 G within 333 seconds, along an axis parallel to the longitudinal spacecraft axis
Decompression: 90 minutes in a vacuum of 10-6 atmosphere at a temperature of 160°F and 30 minutes at 200°F
High Pressure: 1.6 atmosphere for a minimum period of one hour
Vibration: Three cycles of 30 minutes of vibration varying from 5 to 2000 Hz
Acoustic Noise: 130 DB over a frequency range of 40 to 10,000 Hz, duration 30 minutes

Omega Speedmaster's Moon Landing

In the end, only one watch passed the tests: Omega Speedmaster. With that, the Speedmaster became NASA’s official watch for space exploration. Each astronaut was equipped with one from that point on. Now here’s a curious piece of history: the Omega company in Switzerland was unaware that their watch had been selected! This was because NASA procured the watches from the Omega USA subsidiary, which did not inform Omega headquarters of the project.

Omega headquarters only found out by seeing a news photograph of the Speedmaster on the arm of astronaut Ed White, during America’s first space walk in June 1965 – almost a year after testing had begun! It was four years later that the Speedmaster cemented its fame. On July 20^th, 1969, Neil Armstrong and Buzz Aldrin both wore an Omega Speedmaster as they walked on the moon. This was an unprecedented achievement for an off-the-shelf watch that had not at all been designed with space flight in mind. It remains part of the official gear issues to Nasa astronauts to this day, making it one of the longest continuous-use equipment items in the space program.

The Alaska Project

A few years after adopting the Speedmaster for space missions, NASA and Omega partnered to jointly develop a new version of the Speedmaster, designed from the ground up for space exploration. The project was undertaken in strict secrecy and code named The Alaska Project. The goal of the project was to make the perfect “space watch,” one resistant to extreme temperatures and solar radiation. Function dictated every design decision, leading to first-time innovations in watch making, as well as interesting aesthetic results. The Alaska Project Speedmaster result looked very different from the original. It was distinguished by the oversized, red, anodized, aluminum casing (removable).

The low thermal conductivity of aluminum protexted the watch against extreme temperature fluctuations, high and low, whilethe red color protected against some wavelengths of solar radiation. The watch case itself was made from titanium – a first-time innovation in watch making. The dial color was changed from black to white, because the white golod reflected the maximum amount of solar radiation awar from the watch. Omega produced five Alaska Project prototypes by 1969, but by that time, priorities were changing in the space program. NASA decided the original Speedmaster was fulfilling its role as mission watch sufficiently well, so no Alaska Project Speedmasters were ever ordered into production.

Omega Speedmaster's Unique History

No other watch on Earth has such a unique history, nor had any watch endured such rigorous, independent testing of quality as the Speedmaster. The irony of the Omega Speedmaster is the original, Earth-designed Speedmaster was adapted for the most important space exploration missions in history, and it still NASA’s official space flight watch, while the space-designed Speedmaster never left the ground.

Collector’s today can find many versions of the Omega Speedmaster, from modern models to the vintage “pre-moon” version of the 1950’s-1960’s, including a limited collector’s edition of the Alaska Project. Visit us today if you’re in search of an out-of-this-world luxury watch!

How to Maintain Your Swiss-Made Watches

2023-06-142024-05-24 by Rylee Kahan

A fine Swiss watch can last for generations and still be running strong 100 years from now. Everyone considers cost, especially in this economy, but in the long run it can be more economical to buy a good Swiss watch. These will last for years rather than buying cheaper watches again and again.

Swiss watches are crafted with exacting care and subjected to rigorous quality control measures before being presented for sale. A fine watch is a wonderful heirloom to pass on to your children.

However, proper care is necessary for a fine timepiece to stay in optimum working condition and hold its value. Just like a car, a Swiss watch needs to get a regular tune up for its best performance. A full service is recommended every 3-5 years for maintenance.

Swiss-Made Watch Maintenance in San Diego

Our master watchmaker performs a full clean and overhaul, dismantling the timepiece to examine the movement and clean all parts. We provide an estimate for any worn parts that need to be replaced.

The movement will be lubricated and pressure tested, and the time-keeping adjusted and regulated. We also include a full exterior refinish, buffing and polishing the watch case and bracelet. This removes tiny scratches and makes it look good as new again.

Once your watch is in tip-top condition, keep your automatic watch on a watch winder whenever you’re not wearing it. A Wolf Design watch winder moves the watch in a circular pattern to approximate the human motions that keep the self-winding mechanism working.

Using a watch winder protects the longevity of your automatic watch. This is because it keeps the mainspring at its optimum tension and disperses the oils used for lubrication evenly while the watch is not on your wrist. It also keeps the watch running while you’re not wearing it. This means you won’t have to reset the time, day, and/or date when you wear it next!

A watch with a quartz or manual-wind movement doesn’t need a watch winder. Though it does need a nice watch holder for storage when you’re not wearing it, to prevent scratches, being dropped, or getting wet.

Here at Leo Hamel Fine Jewelers, we have a broad selection of heirloom-quality Swiss watches for every taste and budget. Visit our showroom, just east of the 5 across from the airport, and our expert sales team will gladly help you find the perfect timepiece!

Father’s Day Gifts at Leo Hamel’s

2023-06-102024-05-24 by Rylee Kahan

Father’s Day is right around the corner! If you’ve slacked on getting your Dad the best gift to show your love and appreciation, hurry to Leo Hamel Fine Jewelers! Whether you’re shopping for your Dad, Grandpa, brother, or anyone else, you’re sure to find something special for all the important men in your life. Below are our top choices for 2023 Father’s Day gift ideas but be sure to stop by our San Diego jewelry store to see the wide assortment of other items we have to offer!

Every man deserves a classy watch, especially the man that raised you. After all the love and support he’s given you, it’s only right to show how much you appreciate him with such a grand gesture. And if your Dad doesn’t already own a luxury watch, it will make this Father’s Day gift much more special.

So, what’s your father’s style like? If he’s more modern, opt for a contemporary watch with a classic appeal. If he’s more old school, aim for something vintage and timeless.

Does your Dad already have a nice collection of watches? Then why not get him a Father’s Day gift that will always come in handy? Maybe you’ve never even thought about where your Dad stores all of his watches, but we’re betting it’s not the safest place. This Father’s Day, get Dad a Wolf watch case so he never has to worry about damaging his watches when they aren’t being worn.

Is your Dad an automatic watch lover? Go one step further and get him a Wolf watch winder that will keep all of his watches running while they’re not being worn! He’ll totally appreciate not having to reset the date and time on his watches every time he wants to wear one, trust us.

Cufflinks always make an exceptional Father’s Day gift. Whether your Dad wears suits often or not, he’ll always think of you whenever he puts them on. And cufflinks are just so classy! Depending on his style and favorite hobbies, we have a wide variety of unique and designer cufflinks.

You’d be surprised how many big-name designer brands have entire lines of designs tailored to men. Big names like John Hardy, Tiffany & Co., Louis Vuitton, Gucci and more all have unisex and men’s lines of interesting and unique designs. A vintage designer bracelet, ring or accessory can be a highly personal gift and show that you pay attention to his individual style more than he might realize.

Father’s Day is Sunday, June 18^th, and although we are CLOSED on Father’s Day, we are OPEN on Saturday June 17^th from 11am to 5pm for your shopping needs. Free gift wrap included with every purchase! Please visit our showroom sooner rather than later to get your shopping done before time runs out! If you know what you want, or even more so if you don’t, give us a call at 619-299-1500, or visit us so our skilled team can help you find the perfect gift for any Dad this year!

Make the Most of Your Outfit with Accessories

2023-05-062024-05-24 by Rylee Kahan

Accessories provide interest to your outfit. Without them, you run the risk of getting bored with your wardrobe, and your outfits looking bland since they’re always the same. They extend the life of your clothes and familiar ensembles. With a change of accessories, an outfit you were so familiar with can have a new lease on life and a new place in your wardrobe.

They create interesting details where clothes are simple or plain. They add personality to your look and give you an opportunity to express your unique personal style. Accessories also add versatility. With a change in accessories, you can wear the same ensemble over and over, but it looks and feels different with different accessories.

5 Types of Accessories

Shoes: Unlike other accessories, you’ll most likely need to wear shoes every day. Although it’s important to have a few neutral footwear options in your capsule collection, statement footwear can elevate your look. Look for shoes that are fun and comfortable – or else you’ll never wear them. However, splurging on designer stiletto heels that you can wear for a couple of hours to a cocktail party is never wrong.

Jewelry: Whether your jewelry box currently contains one fine watch or a host of bangles, statement necklaces, chandelier earrings, and chokers, you probably turn to jewelry when you’re looking to add a little sparkle to your look. If you’re new to jewelry, you might start with a subtle piece of jewelry like diamond studs, hoop earrings, or a pendant necklace – classic pieces that will work with almost anything.

Hair Accessories: Hair accessories offer an easy way to show off your personal style. Look at your current hair accessories and see if there’s room for an upgrade. Can you swap a plain hair tie for a silk scrunchie? A plain clip for a colorful one?

Handbags: Different bags – from totes to clutches – are appropriate for different occasions. If you have handbags in varied styles and colors, you’ll always have a unique accessory. Designer handbags from Gucci, Saint Laurent, Louis Vuitton, and Chanel upgrade any outfit’s style quotient. And buying vintage mint condition bags can make high-end more affordable.

Belts: Belts aren’t just for function; they’re for fashion, too. Whether you choose a narrow or wide belt, a simple belt or one with embellishments, defining your waistline with a belt is one of the easiest ways to make an outfit look more polished.

5 Tips for Choosing Accessories

Choose a signature accessory. If you feel overwhelmed by accessory options, choose just one statement piece that makes you feel great and that you can wear with multiple outfits. When you’re ready to add more accessories, create balance by choosing one piece to dominate your look in terms of size or color, then layer on more subtle accessories.

Think about colors and patterns. Accessories are a great way to add a pop of color to a simple outfit. Bright colors and animal prints can be difficult to work into your wardrobe, but vibrant, fun accessories like shoes, a belt, or a scarf can elevate your look.

Use accessories to transform an outfit. Accessories are an easy way to take an outfit from the office to dinner with friends. A classic little black dress looks work-appropriate when paired with a blazer and flats. Ditch the blazer, swap the flats for stilettos, and add a pair of diamond earrings or a bright gemstone cocktail ring, and you’re ready for a night out. Have a few go-to accessories in mind for those moments when you’re not able to make a full outfit change.

Look for accessories that express your personality. Love bees? Gucci bee earrings will be an attention-grabbing addition. Is your dog everything to you? Look for a cute diamond dog bone pendant by Tiffany & Co. Serious about the sea? Seashell earrings or a starfish ring from Denny Wong is a must.

You can’t go wrong with jewelry by famous designers. Explore different designers to find one that vibes with your style and collect a few of their pieces, such as Tiffany & Co. or David Yurman. Or diversify and get pieces from several designers whose jewelry you admire, from the likes of Cartier, Chanel, John Hardy, and Chopard.

How to Successfully Accessorize

Add More: Consider adding some additional accessory pizazz to your everyday outfit, or step up the accessories you do wear a couple notches. Sure, some warn of over-accessorizing, but there’s far more of the opposite – not enough accessorizing. It’s very easy to fall into a pattern of bland outfits. Stacking gold bangles or gemstone rings, and layering necklaces of different lengths and patterns can step up your game.

Habitually Accessorize: Adding accessories isn’t something to be done just for special occasions – accessorizing is for every day. When you get the hang of it, adding an accessory or two will feel like a natural way to complete an outfit. And that’s exactly it – no outfit is truly complete without accessories. No matter what your day holds, consider wearing at least one accessory item, even if you think you’ll just be sitting at home. Accessories add flavor and zest to a casual ensemble, and you often don’t need more than one to upstyle an outfit.

The Key to Accessorizing: The key to successful accessorizing, other than making it a habit, is to find and wear accessories in your style. And there is a style for everyone. Successful accessorizing is wearing only those accessories in the style you love and works for you.

There’s no better place to find one-of-a-kind accessories than Leo Hamel Fine Jewelers! Shop an extraordinary collection of vintage designer handbags and wallets as well as our new, vintage, and designer jewelry, all at a price you’ll love. You deserve to have your own unique style, and you’ll find the perfect accessories here at Leo’s!

2023 Valentine’s Day Gift Guide

2023-01-312024-05-24 by Rylee Kahan

Valentine’s Day is a day to share your love with each other and show your special man or woman just how much you adore and admire them. Even if you try to demonstrate your love every day, Valentine’s Day is the day to make an extra effort. What better way to do that than with a thoughtfully chosen piece of jewelry or a watch that shows how much you pay attention to what he or she likes?

Since everyone’s personal taste is extremely important for their style, be sure to keep your loved one’s personal style, lifestyle, and the frequency in which they wear jewelry and accessories in mind.

Our team is eager to help you find the perfect gift for your Valentine! Leo Hamel’s has a wide variety including intricate rings and bold necklaces, new and pre-owned watches, designer jewelry, accessories, and handbags. Here’s a peek into our Valentine’s Day collection.

For Her

Valentine’s Day is a day to pay extra attention to the special woman in your life, and these gifts are great options that will show her how much you care.

For Him

While Valentine’s Day leans heavily towards gifts for women, it’s the perfect opportunity to show the man in your life how meaningful he is to you.

Vintage Freeform Ring Slide

Vintage Freeform Ring

Vintage 14k white gold high polish freeform ring set with 0.22 carats of round brilliant cut diamonds. Retails for $675, Our Price: $475